The secret to deck cleaning is using the right method, not the most pressure. In Corning, CA, we match the cleaner and pressure to the surface so it comes out clean without damage.
The right method for the job
Is it time for deck cleaning?
- Gray, weathered boards
- Green or black growth and slippery spots
- Stain that is peeling or worn through
- Dark spots under planters and furniture
- Mildew between composite boards
Where the grime comes from
- Sun breaking down the wood surface (it turns gray)
- Shade, leaves and moisture feeding mildew
- Old stain or sealer wearing unevenly
- Pollen and dirt trapped in the gaps
What you can do yourself
- Clear the gaps between boards with a putty knife so water drains
- Sweep often and keep leaves off the deck
- Move planters and rugs now and then
- Check for loose boards, nails and soft spots before anyone washes it
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Common mistakes to avoid
- Furry, gouged wood and lap marks from too much pressure
- Water and grime blasted onto the house siding
- Using chlorine bleach on wood, which can damage fibers and fasteners
- Washing composite decking in a way that voids its warranty
What happens on the day
- Inspect the boards, rails and finish
- Protect nearby siding and plants
- Apply a wood or composite cleaner and let it dwell
- Rinse at low pressure, following the grain
- Apply brightener on wood and let it dry before any stain
Deck Cleaning cost in Corning, CA
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Serving Corning, CA and nearby towns
Sun is hard on decks and fences in California. Wood dries, cracks and grays quickly, so a cleaning and a UV-resistant stain every couple of years help.
Much of California has hard water. Sprinklers and misters leave white mineral spots on walls, windows, fences and pool tile, and those spots need a mineral-safe cleaner, not more pressure.
We provide deck cleaning across Corning (ZIP code 96021) and nearby towns including Los Molinos (7.7 mi), Orland (12.5 mi), Red Bluff (17.6 mi) and Chico (22.8 mi). Call (555) 010-0000 for a free quote in Corning.
Deck Cleaning: frequently asked questions
How much does deck cleaning cost in Corning, CA?
Deck Cleaning typically costs $250-$600 for a typical 200-400 sq ft deck, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for deck cleaning?
Deck Cleaning is done with low-pressure wash with wood cleaner. Low pressure and the right solution remove growth and dirt without damaging the surface, and the growth takes longer to come back.
Is deck cleaning safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule deck cleaning?
Once a year. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.